|
Product Features |
DC output:
+5V / 30A
+12V / 16A
+3.3V / 20A
-5V / 0.3A
-12V / 0.8A
+5Vsb / 2A
+5V and +3.3V shall not exceed 150W.
+5V and +3.3V and +12V shall not exceed 278W. |
|
Specification |
|
Remote On/Off Control |
When PS-ON is pulled to TTL Low, the DC output is to be enabled.
When PS-OFF is pulled to TTL high, the DC output is to be disabled.
PW-OK is power good signal and should be asserted high by the power supply to indicate
that +5VDC and +3.3VDC output are above the under
voltage thresholds of the power supply TTL. compatible signal out with
100ms to 500ms |
|
Efficiency |
≧ 70﹪at full load. (Normal Line) |
|
Hold-Up Time |
16ms at maximum load and normal input voltage |
|
PROTECTIONS |
OVER VOLTAGE PROTECTION (OVP)
SHORT CIRCUIT PROTECTION (SCP)
OVER POWER PROTECTION (OPP) |
|
MTBF (Electronics) |
100,000 hours at full load and 25℃ ambient temperature |
|
MTBF (Fan) |
40,000 hours at 40℃ |
|
EMI |
FCC part 15, Subpart B, Class B EN55022 CISPR22 Class B |
|
Remote ON/OFF
Control |
When PS-ON is pull to TTL low,
the DC output is to be enabled.
When PS-OFF is pull to TTL high
the DC output is to be disabled |
|
RoHS |
Compliant |
|
COOLING |
Two 60mm DC FANS |
|
Mechanical & Environment |
|
Operating
Temperature |
0o~45oC |
|
Storage Temperature |
-20o~70oC |
|
Relative Humidity |
5~90%, non-condensing |
|
Dimensions |
200x100x70(mm) |
|
Compliant/Approval |
EN-61000-3-2 CLASS D ( Active PFC ),
UL60950, CAN/CSA22.2 No.60950 |
|
Ordering Information |
|
Part Number |
Description |
|
TC-2300 |
2U Industrial 300W Auto
Ranging Power Supply |
|
|
|
|
* All product
specifications and product images are subject to
change without notice.
|
